自動化ガイド Application testing Mobile testing Testing mobile applications Android Automation Setting up the test environment Setting up installation local appium server

 Setting up a physical Android device

Setting up a physical Android device

Ensure that you have configured your Android device to accept from Appium server (see Basic-configuration).

To set up an Android device via USB cable, perform the following steps:

1. Connect the device using USB cable
2. Make sure in android “Developer Options”, “USB Debugging” and “Install via USB” options are enabled.
3. Verify adb devices command is showing the connected device name

To set up an Android device via Wi-Fi, perform the following steps:

1. Connect Android phone and host machine to same WiFi network
2. Connect Android phone to host machine using USB cable (to start with)
3. Run adb tcpip 5555 from a command prompt
4. Run adb shell "ip addr show wlan0 | grep -e wlan0$ | cut -d\" \" -f 6 | cut -d/ -f 1" to obtain the phone’s IP address
5. Disconnect USB cable and run adb connect <your_ip_address>:5555
6. Verify adb devices command is showing the connected device name